KM 10

  1. Elevator Parts
  2. Elevator Controllers
  3. Door Control Units
  4. KM 10
Input Supply Voltage 20VAC±%10
Maximum Power Consumption 10W (Control Circuit) + Motor power
Feed Protection Fuse Protected (8A)
Language Options Turkish, English and Greek
Standard Interface 2 Rows, 16 Character LCD display, 4- Button Button Kit
Audio Warning With the Buzzer
Dimensions (mm) 116 x 160 x 50 (Width x Length x Height)
Other Detailed Setting and Status Monitoring with 1 Piece of Programmable Input Integrated Keypad LCD display
  • Motor Domination
  • The KM-10 door control card provides full control of the motor with 4 zone motor control and dual channel high resolution encoder input as hardware
  • Serial and Smooth
  • The advanced software softens the S in the navigation ramps and permits serial but smooth movements of the door movements with no limit switch-free algorithm
  • No Limit Switches Required
  • The door operator does not need a limit switch for operation. Door width, door open-close positions are detected automatically
  • Battery and DC Supply
  • It can work with 2 12V battery supply or 24VDC external power supply
  • Card Support
  • The acupuncture is made by the card. After emergency door opening with battery support, the card will go to sleep, preventing the discharge of the pacemakers completely
  • Battery Charging System
  • If the elevator is not in the door opening area with the floor signal, it is ensured that the doors are kept closed to the level of the floor in the cordless crawler systems
  • When the door is jammed, the buzzer is turned back on. The jamming is passed slowly through the perceived zone to prevent damage to the passengers and the door
  • Authorization
  • In terms of security, necessary needs and ease of setup, access to the menu has been authorized. Different levels of authority have been assigned to access the menu: producer level, basic level and restricted level
  • Wide Parameter Capability
  • For manufacturers, parameters such as motor reduction ratio, engine revolutions, drive pulley circumference, spoon opening zone, etc. can be entered for application flexibility
  • For user settings, defined speed settings in centimeters per second and defined ramp paths in centimeters can be specified
  • Variability According to Need
  • Door open and closed holding pressure, door jam detection can be adjusted according to the need of the press
  • Counter Support
  • Operation of the door can be monitored by the on / off counter
  • Motor Type 24V DC Motor
  • Motor output power Maximum 200W (8A)
  • Motor Control Type 4 Region Control
  • Motor Protection Against overload and short circuiting
  • Encoder Type 2 channel incremental (does not work with one channel)
  • Encoder Voltage 5 VDC
  • Resolution 100-2048 pulse
  • Battery supply and charge 2 pcs 12V/1.2Ah (in-built charge unit)
  • Battery protection Fuse protection (5A)
  • Door width and speed 50 cm - 300 cm / Maximum 50 cm/s
  • Door fully open / fully closed
  • Door jam or photocell active output
  • Relay contact output. For 3A, 250VAC or 30VDC
  • Door open / close signal
  • Slow signal / fast signal
  • Photocell signal
  • Ground signal
  • Active with 24VDC
  • Suitable for use on fire lift doors (High speed signal input can be detected)