KM_20 Door Control Card
| Input Supply Voltage | 20VAC±%10 |
| Maximum Power Consumption | 10W (Control Circuit) + Motor power |
| Feed Protection | Fuse Protected (8A) |
| Language Options | Turkish, English and Greek |
| Standard Interface | 2 Rows, 16 Character LCD display, 4- Button Button Kit |
| Audio Warning | With the Buzzer |
| Dimensions (mm) | 116 x 160 x 50 (Width x Length x Height) |
| Other | 1 Programmable Input Internal Battery Charge |
- Motor Domination
- Full control of the motor with 4-zone motor control Advanced parameters for motor identification
- Door Movements
- High Comfort
- High comfort with true S softening on the navigation ramps
- Automatic Door Status Detection
- No Limit Shalter Required
- Serial door movements with limit switch unnecessary algorithm. Door width, door open-close positions are detected automatically
- Power Interruption
- Battery and DC Supply
- It can work with 2 12V battery supply or 24VDC external power supply. The type of emergency feed is easily selectable with the jumper on the card
- Battery Check
- Card Support
- The acupuncture is made by the card. After emergency door opening with battery supply, the card will go to sleep, preventing the discharge of the pacemakers completely
- Closed Doors Up to Floor Level
- Battery Charging System
- If the elevator is not in the door opening area with the floor signal, it is ensured that the doors are kept closed to the level of the floor in the cordless crawler systems
- Possible Door Jam
- When the door is jammed, the buzzer is turned back on. The jamming is passed slowly through the perceived zone to prevent damage to the passengers and the door
- Application Flexibility
- Wide Parameter Capability
- For manufacturers, parameters such as motor reduction ratio, engine revolutions, drive pulley circumference, spoon opening zone, etc. can be entered for application flexibility
- User Settings
- For user settings, defined speed settings in centimeters per second and defined ramp paths in centimeters can be specified
- Pressure Settings
- Variability According to Need
- Door open and closed holding pressure, door jam detection can be adjusted according to the need of the press
- Fully Integrated Operation
- Isolated Inputs / Outputs
- Isolated inputs and relay outputs for fully integrated operation with control panels
- Keyboard
- Detailed setting and status monitoring with KM-20 Keypad (Optional)
- Access to the Menu
- Delegation
- In terms of security, necessary needs and ease of setup, access to the menu has been authorized. Different levels of authority have been assigned to access the menu: producer level, basic level and restricted level
- Door Operation Attachment
- Counter Support
- Operation of the door can be monitored by the on/off counter
- Other Features
- Engine Type
- 24V Reducing DC Motor
- Engine Output Power Max. 200W (8A)
- Motor Control Shape 4 Zone Control
- Engine Protection Overload and Short Circuit Protection
- Encoder Type 2 Channel Incremental Encoder (Can not be operated with single channel encoder)
- Encoder Voltage 5 VDC
- Resolution Any Model Between 100-2048 pals
- Battery Supply 2 pieces 12V / 1.2Ah Battery
- Battery Protection Fuse Protection (5A)
- Door Width and Speed 50 cm-300 cm/Max. 50 cm/s
- Door fully open / fully closed
- Door jam or photocell active output
- Relay contact output. For 3A, 250VAC or 30VDC
- Door open / close signal
- Slow signal / fast signal
- Photocell signal
- Ground signal
- Active with 24VDC
- Suitable for use on fire lift doors (High speed signal input can be detected)
- The door can be fully opened, completely closed, and contact outputs with jam / photocell detection for fully integrated operation with the control panels
- With slow speed signal input, the photocell signal is not taken into consideration in long time photocell cutting and the doors are closed at slow speed and with audible warning (Nudging mode)
