Compliance with Standars EN 81/1-2 + A3
Drive Type Two Speed, Hydraulic, VVVF
Maximum Elevator Speed 2.5 m/sec
Group Work 8
Number of Stops 48
Control Type Up or Down Collective Double Button Collective
Serial Communication With floors and cabinh
Cabin Position Information Magnetic Switches Encoder System
Automatic Door Control Single Door, Double Door
Door Bridging Available
Display Outputs 7 Segment, Gray/Binary Code LCD Output
Language Options Turkish, English, Russian, Dutch, Polish, Swedish, French, Italian
  • Any kind of automatic door control
    • 1 piece of door control inputs and outputs in the revision box, 2 in the control panel
    • Early opening of door and door open level renewal by door bridge circuit on the control card
  • Protection Systems
    • Ready inputs / outputs on the control board and motor protection
    • Leakage current protected cabin and well feed fuses
    • Special connections for safety circuits in the control panel, revision box and downhole box
    • Well lighting control with pulse current switch (with buttons from the top of the cabinet and from the bottom of the well)
  • Door control independent of stops with double door support
  • Serial cabinet communication via CANbus line
  • One-to-one connection with the plug-in flat cable between the control panel and the revision box
  • Plug-and-play connection between cabinet operation panel and revision box with plug-in single cable
  • Serial communication via CANbus line
  • Well CANbus line extending along the whole well, with plug cables from floor to floor
  • Plug-in connection with plug-in cable attached to the CANbus line for each floor well for floor control panel
  • Door contact installation extending along the whole well, with plug cables from floor to floor
  • Connection with plug-in cables for floor-to-door contact installation for floor door plug- lock contacts
  • Plug-in connection with downhole box via single cable
  • Integrated AKUS-SD chip in the panel
  • Emergency lowering system (for hydraulic elevators) with ARL-SARJ card and 2 12V battery additions
  • Special test function for testing cabinet and floor panel connections
  • Controlling the ARL-500 board and ADrive speed controller from any point with a hand-held terminal connected to the CANbus line
  • Emergency alarm siren (with buttons on the cabinet and on the bottom of the well)